Excellent heat resistance
Vispeek??series |
Tg?(?C) |
Tm?(?C) |
HDT?(?C) |
9-PEEK |
143 |
343 |
>330 |
HT9-PEEKK* |
161 |
367 |
>330 |
ST9-PEDEKK* |
183 |
409 |
>330 |
*In development
? Outstanding friction and wear resistance
? Excellent chemical resistance
? Excellent resistance to hydrolysis
? Good intrinsic flame retardancy
? Little smoke and toxic gas release during combustion
? Low water absorption, resulting in high dimensional stability
? Good electrical performance
? Good processability
Automobile
¡¤ ? Machinery and equippment
¡¤ ? Electronics and semiconductors
¡¤ ? Cable
¡¤ ? Coating
Grades |
Description |
Vispeek??9001AP |
Low viscosity, ? unreinforced, fine powder, UL94 V-0 at 0.75~3.0 mm, for powder coating |
Vispeek??9002P |
High viscosity, ? unreinforced, powder, UL94 V-0 at 0.75~3.0 mm, for extrusion and compression ? molding |
Vispeek??9003P |
Standard ? viscosity, unreinforced, powder, UL94 V-0 at 0.75~3.0 mm, for extrusion and ? compression molding |
Vispeek??9002G |
Medium ? viscosity, unreinforced, granule, UL94 V-0 at 0.75~3.0 mm, for extrusion and ? injection molding |
Vispeek??9003G |
Standard viscosity, unreinforced, granule, UL94 V-0 at ? 0.75~3.0 mm, for extrusion and injection molding |
Vispeek??GR9103 |
10% GF reinforced, UL94 V-0 at 0.5~3.0mm, for injection ? molding |
Vispeek??GR9303 |
30% GF reinforced, UL94 V-0 at 0.5~3.0mm, for injection ? molding |
Vispeek??CF9202 |
20% CF reinforced, UL94 V-0 at 0.5~3.0mm, for injection ? molding |
Vispeek??CF9303 |
30% CF reinforced, UL94 V-0 at 0.5~3.0mm, for injection ? molding |
Vispeek??FG9303 |
10% CF and 10% graphite co-reinforced, plus 10% PTFE |
Vispeek??9003E3 |
Antistatic, for extrusion and injection molding |
